All MIBs › IBM-INTERFACE-MIB › ibminterfaceClearDeviceSpecific
ibminterfaceClearDeviceSpecific
Module: IBM-INTERFACE-MIB
OID (symbolic): IBM-INTERFACE-MIB::ibminterfaceClearDeviceSpecific
OID (numeric): 1.3.6.1.4.1.2.6.119.4.17.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When SET to a value of clear(1), all the device specific counters are reset. For example, for an Ethernet interface, all the counters provided in the dot3StatsTable are reset.
When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.
What is ibminterfaceClearDeviceSpecific?
This read-write trigger object resets all device-specific counters for this interface when set to clear(1), such as, for an Ethernet interface, all counters in the dot3StatsTable; reading it always returns noaction(0) since it exists purely to trigger an action, not to report state. Admins use this to clear media-specific statistics that aren't covered by the generic interface counters. For example, setting it to clear(1) on an Ethernet interface resets its dot3StatsTable collision and alignment error counters.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.17.1.1.12 snmpwalk -v2c -c public <target> IBM-INTERFACE-MIB::ibminterfaceClearDeviceSpecific
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.17.1.1.12.1 snmpget -v2c -c public <target> IBM-INTERFACE-MIB::ibminterfaceClearDeviceSpecific.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.119.4.17.1.1.12.1 i <value>
Start monitoring IBM networking equipment (routers/switches) with IF-MIB counter-reset extension with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-INTERFACE-MIB::ibminterfaceClearDeviceSpecific OID value, configure state conditions and alerts, and monitor any IBM networking equipment (routers/switches) with IF-MIB counter-reset extension from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6.119 | ibmIROC | IBMIROCDIALOUT-MIB |
| 1.3.6.1.4.1.2.6.119.4 | ibmIROCrouting | IBMIROCDIALOUT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.119.4.17 | ibmIROCroutinginterface | IBM-INTERFACE-MIB |
| 1.3.6.1.4.1.2.6.119.4.17.1 | ibminterfaceClearTable | IBM-INTERFACE-MIB |
| 1.3.6.1.4.1.2.6.119.4.17.1.1 | ibminterfaceClearEntry | IBM-INTERFACE-MIB |
| 1.3.6.1.4.1.2.6.119.4.17.1.1.12 | ibminterfaceClearDeviceSpecific | IBM-INTERFACE-MIB |