All MIBs › IBM-BCCUSTOM-MIB › iomSnmpv3UserState
iomSnmpv3UserState
Module: IBM-BCCUSTOM-MIB
OID (symbolic): IBM-BCCUSTOM-MIB::iomSnmpv3UserState
OID (numeric): 1.3.6.1.4.1.2.6.215.6.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates the state of the user: Enabled or Disabled. The sequence of creating and enabling a user account or changing various OID<92>s of the SNMPv3 user account will be as follows: (1) Set the <91>iomSnmpv3UserState<92> to disabled. (2) Configure all the appropriate v3 user account information and trap address objects. (3) Set the <91>snmpv3UserState<92> to enabled. When the IOM receives a set to enable, the IOM is responsible to validate that all the SNMPv3 user objects are valid to create a functioning v3 user account. If they are not then the response to this set should fail as described in (4). (4) If all objects have been set correctly the response to this object will be <91>success<92> otherwise the response will indicate failure. Note: enforcing disabling then enabling the user account will ensure no partial account will be configured in the IOM SNMP agent.
What is iomSnmpv3UserState?
Enables or disables the dedicated SNMPv3 user account. The intended sequence is: disable the account, configure all the user/protocol/trap objects, then set this to enabled -- at which point the module validates every field and fails the enable if any parameter (username, protocols, passwords, trap addresses) is invalid or missing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.215.6.1.9 snmpwalk -v2c -c public <target> IBM-BCCUSTOM-MIB::iomSnmpv3UserState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.215.6.1.9.1 snmpget -v2c -c public <target> IBM-BCCUSTOM-MIB::iomSnmpv3UserState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.215.6.1.9.1 i <value>
Start monitoring IBM-branded Brocade SAN/Fibre Channel switch (Pharos embedded platform) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-BCCUSTOM-MIB::iomSnmpv3UserState OID value, configure state conditions and alerts, and monitor any IBM-branded Brocade SAN/Fibre Channel switch (Pharos embedded platform) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | IBM-6611-APPN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.215 | bcCustom | IBM-BCCUSTOM-MIB |
| 1.3.6.1.4.1.2.6.215.6 | snmpuser | IBM-BCCUSTOM-MIB |
| 1.3.6.1.4.1.2.6.215.6.1 | iomSnmpv3Cfg | IBM-BCCUSTOM-MIB |
| 1.3.6.1.4.1.2.6.215.6.1.9 | iomSnmpv3UserState | IBM-BCCUSTOM-MIB |