All MIBs › IBM-BCCUSTOM-MIB › iomSnmpv3UserIPv6TrapAddress
iomSnmpv3UserIPv6TrapAddress
Module: IBM-BCCUSTOM-MIB
OID (symbolic): IBM-BCCUSTOM-MIB::iomSnmpv3UserIPv6TrapAddress
OID (numeric): 1.3.6.1.4.1.2.6.215.6.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Trap destination IPv6 address. Note: This address represents the address that will be used by an external application for receiving SNMPv3 traps directly from the IOM<92>s SNMPv3 agent user account that has been configured in the user account OID(s) (iomSnmpv3User..). This address is in addition to the MM<92>s IP address and does not override or replace that trap address. This value is normally set to zero and will only be set when the external application request the MM to set to a valid IP address. A value of all zeroes indicates no address is configured. Both IPv4 and IPv6 addresses can be set and if they are then the IOM must send traps to both the IPv4 and IPv6 address. The format will be a string with a generic format of the IPv6 address as follows: <91>abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd<92>, also may be the compressed IPv6 address format, for example fe80::211:25ff:fec3:d364 .
What is iomSnmpv3UserIPv6TrapAddress?
Sets an IPv6 address, in either full or compressed form (e.g. fe80::211:25ff:fec3:d364), where the module should additionally send SNMPv3 traps from its dedicated user account, on top of the management module's own address. All-zeroes disables this extra IPv6 trap destination.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.215.6.1.7 snmpwalk -v2c -c public <target> IBM-BCCUSTOM-MIB::iomSnmpv3UserIPv6TrapAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.215.6.1.7.1 snmpget -v2c -c public <target> IBM-BCCUSTOM-MIB::iomSnmpv3UserIPv6TrapAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.215.6.1.7.1 s <value>
Start monitoring IBM-branded Brocade SAN/Fibre Channel switch (Pharos embedded platform) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-BCCUSTOM-MIB::iomSnmpv3UserIPv6TrapAddress OID value, configure state conditions and alerts, and monitor any IBM-branded Brocade SAN/Fibre Channel switch (Pharos embedded platform) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | IBM-6611-APPN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.215 | bcCustom | IBM-BCCUSTOM-MIB |
| 1.3.6.1.4.1.2.6.215.6 | snmpuser | IBM-BCCUSTOM-MIB |
| 1.3.6.1.4.1.2.6.215.6.1 | iomSnmpv3Cfg | IBM-BCCUSTOM-MIB |
| 1.3.6.1.4.1.2.6.215.6.1.7 | iomSnmpv3UserIPv6TrapAddress | IBM-BCCUSTOM-MIB |