All MIBs › HWMUSA-SHDSL-CPE-MIB › umSdslE1T1LocalAlarmStatus
umSdslE1T1LocalAlarmStatus
Module: HWMUSA-SHDSL-CPE-MIB
OID (symbolic): HWMUSA-SHDSL-CPE-MIB::umSdslE1T1LocalAlarmStatus
OID (numeric): 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The variable initiate the local current alarm status. (bit) 0: (E1T1) E1 LOS Failure (Loss of signal) 1: (E1T1) Loss of Frame Alignment 2: (E1T1) Loss of E1T1 Multiframe Alignment 3: (E1T1) AIS received 4: (E1T1) AIS received in TS16 5: (E1T1) RAI received 6: (E1T1) RAI received in TS16 7: (E1T1) Bit errors exceed error ratio 8: (E1T1) LCV exceed day threshold 9: (E1T1) LCV exceed quarter threshold 10: (E1T1) PCV exceed day threshold 11: (E1T1) PCV exceed quarter threshold 12: (E1T1) ES exceed day threshold 13: (E1T1) ES exceed quarter threshold 14: (E1T1) SES exceed day threshold 15: (E1T1) SES exceed quarter threshold 16: (E1T1) SEFS exceed day threshold 17: (E1T1) SEFS exceed quarter threshold 18: (E1T1) UAS exceed day threshold 19: (E1T1) UAS exceed quarter threshold 20: (E1T1) CSS exceed day threshold 21: (E1T1) CSS exceed quarter threshold 22: (E1T1) DM exceed day threshold 23: (E1T1) DM exceed quarter threshold 24~31 Reserved
DataType 103
What is umSdslE1T1LocalAlarmStatus?
A bitmask reporting which E1/T1-side alarm conditions are currently active on this port -- e.g. loss of signal, loss of frame/multiframe alignment, AIS/RAI received, bit-error-ratio exceeded, or various day/quarter threshold breaches -- giving a single value an admin can poll to assess E1/T1 line health.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.2 snmpwalk -v2c -c public <target> HWMUSA-SHDSL-CPE-MIB::umSdslE1T1LocalAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.2.1 snmpget -v2c -c public <target> HWMUSA-SHDSL-CPE-MIB::umSdslE1T1LocalAlarmStatus.1
Start monitoring Huawei Technologies SHDSL CPE device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HWMUSA-SHDSL-CPE-MIB::umSdslE1T1LocalAlarmStatus OID value, configure state conditions and alerts, and monitor any Huawei Technologies SHDSL CPE device from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.2 | products | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.2.6 | musa | HUAWEI-MA5200-MIB |
| 1.3.6.1.4.1.2011.2.6.7 | ias | HUAWEI-MIB |
| 1.3.6.1.4.1.2011.2.6.7.4 | hwIasService | HWMUSA-SHDSL-CO-MIB |
| 1.3.6.1.4.1.2011.2.6.7.4.4 | hwMusaShdsl | HWMUSA-SHDSL-CO-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.2.6.7.4.4.2 | hwShdslCPE | HWMUSA-SHDSL-CPE-MIB |
| 1.3.6.1.4.1.2011.2.6.7.4.4.2.4 | hwCPET1E1 | HWMUSA-SHDSL-CPE-MIB |
| 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5 | umSdslE1T1AlarmTable | HWMUSA-SHDSL-CPE-MIB |
| 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1 | umSdslE1T1AlarmEntry | HWMUSA-SHDSL-CPE-MIB |
| 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.2 | umSdslE1T1LocalAlarmStatus | HWMUSA-SHDSL-CPE-MIB |