All MIBs › HUAWEI-VDSL-QAM-MIB › vdslCurrStatus
vdslCurrStatus
Module: HUAWEI-VDSL-QAM-MIB
OID (symbolic): HUAWEI-VDSL-QAM-MIB::vdslCurrStatus
OID (numeric): 1.3.6.1.4.1.2011.5.28.1.1.2.1.7
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Indicates current state of the Vtu line. This is a bit-map of possible conditions. The various bit positions are:
0 noDefect There no defects on the line
1 lossOfFraming Vtu failure due to not receiving valid frame.
2 lossOfSignal Vtu failure due to not receiving signal.
3 lossOfPower Vtu failure due to loss of power.
4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7.
5 lossOfLink Vtu failure due to inability to link with peer Vtu.
6 dataInitFailure Vtu failure during initialization due to bit errors corrupting startup exchange data.
7 configInitFailure Vtu failure during initialization due to peer Vtu not able to support requested configuration.
8 protocolInitFailure Vtu failure during initialization due to incompatible protocol used by the peer Vtu.
9 noPeerVtuPresent Vtu failure during initialization due to no activation sequence detected from peer Vtu.
This is intended to supplement ifOperStatus.
What is vdslCurrStatus?
A bitmask of current fault conditions on this Vtu's line - such as loss of framing, loss of signal, loss of power, degraded signal quality, loss of link, or various initialization failures - intended to supplement the standard ifOperStatus with VDSL-specific detail; noDefect means none of these conditions are present.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.28.1.1.2.1.7 snmpwalk -v2c -c public <target> HUAWEI-VDSL-QAM-MIB::vdslCurrStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.28.1.1.2.1.7.1 snmpget -v2c -c public <target> HUAWEI-VDSL-QAM-MIB::vdslCurrStatus.1
Start monitoring Huawei VDSL DSLAM and access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-VDSL-QAM-MIB::vdslCurrStatus OID value, configure state conditions and alerts, and monitor any Huawei VDSL DSLAM and access equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.28 | hwVdslQam | HUAWEI-VDSL-QAM-MIB |
| 1.3.6.1.4.1.2011.5.28.1 | vdslLineMib | HUAWEI-VDSL-QAM-MIB |
| 1.3.6.1.4.1.2011.5.28.1.1 | vdslMibObjects | HUAWEI-VDSL-QAM-MIB |
| 1.3.6.1.4.1.2011.5.28.1.1.2 | vdslPhysTable | HUAWEI-VDSL-QAM-MIB |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1 | vdslPhysEntry | HUAWEI-VDSL-QAM-MIB |
| 1.3.6.1.4.1.2011.5.28.1.1.2.1.7 | vdslCurrStatus | HUAWEI-VDSL-QAM-MIB |