All MIBs › HUAWEI-STACK-MIB › hwStackUpgradeResultFailReason
hwStackUpgradeResultFailReason
Module: HUAWEI-STACK-MIB
OID (symbolic): HUAWEI-STACK-MIB::hwStackUpgradeResultFailReason
OID (numeric): 1.3.6.1.4.1.2011.5.25.183.1.31.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of operation. Only upgrade failure valid. The status of the specified operation can be one of the follows. opUpgradeSuccess(1): upgrade success. opMasterDiskNoSpace(2): flash of master device is no enough space. opNonmasterDiskNoSpace(3): flash of non-master device is no enough space. opInvalidFileInfo(4) :invalid source file name or path is specified. opInvalidFileType(5) :invalid file type. opInvalidServerAddress(6) :invalid server address is specified. opInvalidUserOrPassword(7):invalid server user or password. opDeviceBusy(8) :the device is in use and locked by another process opFileTransferError(9) :file transfer was unsuccessfull. opFileChecksumError(10) :file checksum in Flash si invalid. opNoMemory(11) :system is running in low on memory. opVersionFileNotMatch(12) : the version file does not match the device type. opUpgradeDeviceAbsent(13) : device absent. opUnknownFailure(14) :failure which is unknown. opUpgradeInvalidValue(15):invalid value.
What is hwStackUpgradeResultFailReason?
When hwStackUpgradeResult reports a failure, this gives the specific reason -- e.g. opMasterDiskNoSpace, opFileTransferError, opFileChecksumError, opVersionFileNotMatch -- to help diagnose why the stack upgrade didn't complete.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.183.1.31.1.5 snmpwalk -v2c -c public <target> HUAWEI-STACK-MIB::hwStackUpgradeResultFailReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.183.1.31.1.5.1 snmpget -v2c -c public <target> HUAWEI-STACK-MIB::hwStackUpgradeResultFailReason.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hwStackUpgradeResultFailReason.1
Start monitoring Huawei stackable switch, e.g. S-series (Cluster Switch System stacking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-STACK-MIB::hwStackUpgradeResultFailReason OID value, configure state conditions and alerts, and monitor any Huawei stackable switch, e.g. S-series (Cluster Switch System stacking) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.183 | huaweiStackMIB | HUAWEI-STACK-MIB |
| 1.3.6.1.4.1.2011.5.25.183.1 | hwStackObject | HUAWEI-STACK-MIB |
| 1.3.6.1.4.1.2011.5.25.183.1.31 | hwStackUpgradeResultTable | HUAWEI-STACK-MIB |
| 1.3.6.1.4.1.2011.5.25.183.1.31.1 | hwStackUpgradeResultEntry | HUAWEI-STACK-MIB |
| 1.3.6.1.4.1.2011.5.25.183.1.31.1.5 | hwStackUpgradeResultFailReason | HUAWEI-STACK-MIB |