All MIBs › HUAWEI-SITE-MONITOR-MIB › hwDeviceTrapOrdinalNumber
hwDeviceTrapOrdinalNumber
Module: HUAWEI-SITE-MONITOR-MIB
OID (symbolic): HUAWEI-SITE-MONITOR-MIB::hwDeviceTrapOrdinalNumber
OID (numeric): 1.3.6.1.4.1.2011.6.164.1.1.2.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Site device event trap serial number (SN) is the unique ID of the device event trap. It is used to resend and synchronize event traps. Its value range is 0 to 4294967296. When the value exceeds the maximum value, the system automatically clears the value and numbers the alarm from 0 to 4294967296. If the network management system (NMS) recieve the alarm number is not consequential, in such case that it notifies the SNMP agent the event trap number required. So the monitor send the 50 event trap messages in maximum, after consequencial number required by NMS again. Specially, if NMS set the value to 0, the agent would clear the alarm queue automatically.
What is hwDeviceTrapOrdinalNumber?
Running sequence number stamped on each device-event trap the site monitor sends, used so the NMS can detect gaps and request resends rather than just trusting traps arrived in order. If the NMS notices the numbers it received are not consecutive, it asks the agent to replay up to 50 event traps starting from the required number; setting this object to 0 tells the agent to clear its pending event-trap queue outright.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.164.1.1.2.1 snmpwalk -v2c -c public <target> HUAWEI-SITE-MONITOR-MIB::hwDeviceTrapOrdinalNumber
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.164.1.1.2.1.1 snmpget -v2c -c public <target> HUAWEI-SITE-MONITOR-MIB::hwDeviceTrapOrdinalNumber.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.164.1.1.2.1.1 i <value>
Start monitoring Huawei multi-site management platform (load/backup/patch management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-SITE-MONITOR-MIB::hwDeviceTrapOrdinalNumber OID value, configure state conditions and alerts, and monitor any Huawei multi-site management platform (load/backup/patch management) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.164 | hwSiteMonitorMIB | HUAWEI-SITE-MONITOR-MIB |
| 1.3.6.1.4.1.2011.6.164.1 | hwSiteMonitorMIBObjects | HUAWEI-SITE-MONITOR-MIB |
| 1.3.6.1.4.1.2011.6.164.1.1 | hwSiteInfo | HUAWEI-SITE-MONITOR-MIB |
| 1.3.6.1.4.1.2011.6.164.1.1.2 | hwSiteAlarms | HUAWEI-SITE-MONITOR-MIB |
| 1.3.6.1.4.1.2011.6.164.1.1.2.1 | hwDeviceTrapOrdinalNumber | HUAWEI-SITE-MONITOR-MIB |