All MIBs › HUAWEI-POE-MIB › hwPoeSlotPeakPower
hwPoeSlotPeakPower
Module: HUAWEI-POE-MIB
OID (symbolic): HUAWEI-POE-MIB::hwPoeSlotPeakPower
OID (numeric): 1.3.6.1.4.1.2011.5.25.195.2.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This object identifies the total peak power of a slot. The value is expressed in mW.
What is hwPoeSlotPeakPower?
Reports the highest PoE power, in milliwatts, this slot has drawn since counters were last reset, helping an admin size the slot's power budget for worst-case load rather than just average draw.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.195.2.1.6 snmpwalk -v2c -c public <target> HUAWEI-POE-MIB::hwPoeSlotPeakPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.195.2.1.6.1 snmpget -v2c -c public <target> HUAWEI-POE-MIB::hwPoeSlotPeakPower.1
Start monitoring Huawei PoE-capable switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-POE-MIB::hwPoeSlotPeakPower OID value, configure state conditions and alerts, and monitor any Huawei PoE-capable switch from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.195 | hwPoeMIB | HUAWEI-POE-MIB |
| 1.3.6.1.4.1.2011.5.25.195.2 | hwPoeSlotTable | HUAWEI-POE-MIB |
| 1.3.6.1.4.1.2011.5.25.195.2.1 | hwPoeSlotEntry | HUAWEI-POE-MIB |
| 1.3.6.1.4.1.2011.5.25.195.2.1.6 | hwPoeSlotPeakPower | HUAWEI-POE-MIB |