All MIBs › HUAWEI-POE-MIB › hwPoePower
hwPoePower
Module: HUAWEI-POE-MIB
OID (symbolic): HUAWEI-POE-MIB::hwPoePower
OID (numeric): 1.3.6.1.4.1.2011.5.25.195.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This object identifies the maximum POE power of the system.
What is hwPoePower?
Reports the maximum PoE power budget the switch chassis can supply, expressed as a raw power figure that an admin uses to size how many powered devices like IP phones or APs the whole system can support.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.195.1.1 snmpwalk -v2c -c public <target> HUAWEI-POE-MIB::hwPoePower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.195.1.1.1 snmpget -v2c -c public <target> HUAWEI-POE-MIB::hwPoePower.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hwPoePower.1
Start monitoring Huawei PoE-capable switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-POE-MIB::hwPoePower OID value, configure state conditions and alerts, and monitor any Huawei PoE-capable switch from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.195 | hwPoeMIB | HUAWEI-POE-MIB |
| 1.3.6.1.4.1.2011.5.25.195.1 | hwPoeGlobalObjects | HUAWEI-POE-MIB |
| 1.3.6.1.4.1.2011.5.25.195.1.1 | hwPoePower | HUAWEI-POE-MIB |