All MIBs › HUAWEI-POE-MIB › hwPoePortCurrent
hwPoePortCurrent
Module: HUAWEI-POE-MIB
OID (symbolic): HUAWEI-POE-MIB::hwPoePortCurrent
OID (numeric): 1.3.6.1.4.1.2011.5.25.195.3.1.13
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object indicates the current of an interface. The value is expressed in mA.
What is hwPoePortCurrent?
Reports the electrical current, in milliamps, being drawn by the device connected to this port, a low-level diagnostic an admin checks alongside voltage when troubleshooting a PD that won't power up correctly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.195.3.1.13 snmpwalk -v2c -c public <target> HUAWEI-POE-MIB::hwPoePortCurrent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.195.3.1.13.1 snmpget -v2c -c public <target> HUAWEI-POE-MIB::hwPoePortCurrent.1
Start monitoring Huawei PoE-capable switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-POE-MIB::hwPoePortCurrent OID value, configure state conditions and alerts, and monitor any Huawei PoE-capable switch from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.195 | hwPoeMIB | HUAWEI-POE-MIB |
| 1.3.6.1.4.1.2011.5.25.195.3 | hwPoePortTable | HUAWEI-POE-MIB |
| 1.3.6.1.4.1.2011.5.25.195.3.1 | hwPoePortEntry | HUAWEI-POE-MIB |
| 1.3.6.1.4.1.2011.5.25.195.3.1.13 | hwPoePortCurrent | HUAWEI-POE-MIB |