All MIBs › HUAWEI-LswMix-MIB › hwLswCrossBarStatus

hwLswCrossBarStatus

OID (symbolic): HUAWEI-LswMix-MIB::hwLswCrossBarStatus

OID (numeric): 1.3.6.1.4.1.2011.2.23.1.17.5.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.2.23.1.17.5.1.2
snmpwalk -v2c -c public <target> HUAWEI-LswMix-MIB::hwLswCrossBarStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.2.23.1.17.5.1.2.1
snmpget -v2c -c public <target> HUAWEI-LswMix-MIB::hwLswCrossBarStatus.1

Start monitoring Huawei modular chassis switch (MPU switchover/slot/crossbar fabric status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-LswMix-MIB::hwLswCrossBarStatus OID value, configure state conditions and alerts, and monitor any Huawei modular chassis switch (MPU switchover/slot/crossbar fabric status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.2011	huawei	EXPERTV2-MIB
1.3.6.1.4.1.2011.2	products	EXPERTV2-MIB
1.3.6.1.4.1.2011.2.23	lanSw	HUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.2.23.1	lswCommon	HUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.2.23.1.17	hwLswMix	HUAWEI-3COM-OID-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.2011.2.23.1.17.5	hwLswXSlotTable	HUAWEI-LswMix-MIB
1.3.6.1.4.1.2011.2.23.1.17.5.1	hwLswXSlotEntry	HUAWEI-LswMix-MIB
1.3.6.1.4.1.2011.2.23.1.17.5.1.2	hwLswCrossBarStatus	HUAWEI-LswMix-MIB

HUAWEI-LswMix-MIB :: hwLswCrossBarStatus

hwLswCrossBarStatus

Module

This MIB depends on