All MIBs › HUAWEI-IPFPM-MIB › hwIpfpmDcpMeasureColorFlag
hwIpfpmDcpMeasureColorFlag
Module: HUAWEI-IPFPM-MIB
OID (symbolic): HUAWEI-IPFPM-MIB::hwIpfpmDcpMeasureColorFlag
OID (numeric): 1.3.6.1.4.1.2011.5.25.316.2.1.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This string object indicates the bits of an IP packet used for color measurement. the length of string is 3,first and second character range is <1-6>, third character range is <0-6>. the three characters can not same. The character '0' represents none flag bit. The character '1' represents the bit0 of the FLAGS byte. The character '2' represents the bit3 of the TOS byte. The character '3' represents the bit4 of the TOS byte. The character '4' represents the bit5 of the TOS byte. The character '5' represents the bit6 of the TOS byte. The character '6' represents the bit7 of the TOS byte. the first character represents loss measurement color-bit, the second character represents delay measurement color-bit, the third character represents multicast measurement color-bit.
What is hwIpfpmDcpMeasureColorFlag?
A 3-character configuration string picking which bits of an IP packet are used to 'color' traffic for loss/delay/multicast measurement (e.g. character '1' selects the FLAGS byte's bit0, '2'-'6' select various TOS bits); the 1st character sets the loss-measurement color-bit, the 2nd sets the delay color-bit, and the 3rd sets the multicast color-bit, and the three must differ from each other.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.316.2.1.1.3 snmpwalk -v2c -c public <target> HUAWEI-IPFPM-MIB::hwIpfpmDcpMeasureColorFlag
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.316.2.1.1.3.1 snmpget -v2c -c public <target> HUAWEI-IPFPM-MIB::hwIpfpmDcpMeasureColorFlag.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.25.316.2.1.1.3.1 s <value>
Start monitoring Huawei carrier router/switch supporting IPFPM (IP Flow Performance Measurement) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-IPFPM-MIB::hwIpfpmDcpMeasureColorFlag OID value, configure state conditions and alerts, and monitor any Huawei carrier router/switch supporting IPFPM (IP Flow Performance Measurement) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.316 | hwIpfpmMib | HUAWEI-IPFPM-MIB |
| 1.3.6.1.4.1.2011.5.25.316.2 | hwIpfpmDcpObjects | HUAWEI-IPFPM-MIB |
| 1.3.6.1.4.1.2011.5.25.316.2.1 | hwIpfpmDcpConfiguration | HUAWEI-IPFPM-MIB |
| 1.3.6.1.4.1.2011.5.25.316.2.1.1 | hwIpfpmDcpGlobalTable | HUAWEI-IPFPM-MIB |
| 1.3.6.1.4.1.2011.5.25.316.2.1.1.3 | hwIpfpmDcpMeasureColorFlag | HUAWEI-IPFPM-MIB |