All MIBs › HUAWEI-INNER-LINK-MIB › hwInnerLinkAlarmLight
hwInnerLinkAlarmLight
Module: HUAWEI-INNER-LINK-MIB
OID (symbolic): HUAWEI-INNER-LINK-MIB::hwInnerLinkAlarmLight
OID (numeric): 1.3.6.1.4.1.2011.5.25.158.1.2.1.11
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The alarm status for this entity. It is decided by the alarm status of the physical links which compose the logical link.
When no bits of this attribute are set, then none of the status conditions described below are present. When the value of under repair is set, the resource is currently being repaired.
When the value of critical is set, one or more critical alarms are active against the resource. When the value of major is set, one or more major alarms are active against the resource. When the value of minor is set, one or more minor alarms are active against the resource. When the value of warning is set, one or more warning alarms are active against the resource. When the value of indeterminate is set, one or more alarms of indeterminate severity are active against the resource.
When the value of alarm outstanding is set, one or more alarms is active against the resource. The fault may or may not be disabling.
What is hwInnerLinkAlarmLight?
This bitmask object reports the alarm severity currently active against an inner logical link, derived from the alarm status of its underlying physical links, with bits for conditions like critical, major, minor, warning, or under-repair. Administrators check this to gauge the health of an inter-frame link at a glance without digging through each physical member link individually. For example, if the critical bit is set on a control-channel link's alarm light, it signals a serious fault that could affect management connectivity between frames and warrants immediate investigation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.158.1.2.1.11 snmpwalk -v2c -c public <target> HUAWEI-INNER-LINK-MIB::hwInnerLinkAlarmLight
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.158.1.2.1.11.1 snmpget -v2c -c public <target> HUAWEI-INNER-LINK-MIB::hwInnerLinkAlarmLight.1
Start monitoring Huawei multi-chassis cluster routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-INNER-LINK-MIB::hwInnerLinkAlarmLight OID value, configure state conditions and alerts, and monitor any Huawei multi-chassis cluster routers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.158 | hwInnerLinkMIB | HUAWEI-INNER-LINK-MIB |
| 1.3.6.1.4.1.2011.5.25.158.1 | hwInnerLinkMIBObjects | HUAWEI-INNER-LINK-MIB |
| 1.3.6.1.4.1.2011.5.25.158.1.2 | hwInnerLinkTable | HUAWEI-INNER-LINK-MIB |
| 1.3.6.1.4.1.2011.5.25.158.1.2.1 | hwInnerLinkEntry | HUAWEI-INNER-LINK-MIB |
| 1.3.6.1.4.1.2011.5.25.158.1.2.1.11 | hwInnerLinkAlarmLight | HUAWEI-INNER-LINK-MIB |