HUAWEI-ETHOAM-MIB :: hwDot3ahEfmPeerFunctionsSupported

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-ETHOAM-MIB › hwDot3ahEfmPeerFunctionsSupported

hwDot3ahEfmPeerFunctionsSupported

Module: HUAWEI-ETHOAM-MIB

OID (symbolic): HUAWEI-ETHOAM-MIB::hwDot3ahEfmPeerFunctionsSupported

OID (numeric): 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.7

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to these functions. This value is initialized so all bits are clear.

If unidirectionalSupport(0) is set, then the peer OAM entity supports sending OAM frames on Ethernet interfaces when the receive path is known to be inoperable. If loopbackSupport(1) is set, then the peer OAM entity can send and receive OAM loopback commands. If eventSupport(2) is set, then the peer OAM entity can send and receive event OAMPDUs to signal various error conditions. If variableSupport(3) is set, then the peer OAM entity can send and receive variable requests to monitor attribute value as described in Clause 57 of [802.3ah].

The capabilities of the OAM peer can be determined from the configuration field of the Local Information TLV of the most recently received Information OAMPDU with a Local Information TLV. All zeros are returned if no Local Information TLV has yet been received.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.7
snmpwalk -v2c -c public <target> HUAWEI-ETHOAM-MIB::hwDot3ahEfmPeerFunctionsSupported

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.7.1
snmpget -v2c -c public <target> HUAWEI-ETHOAM-MIB::hwDot3ahEfmPeerFunctionsSupported.1

Start monitoring Huawei carrier Ethernet switch/router (802.1ag CFM Ethernet OAM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-ETHOAM-MIB::hwDot3ahEfmPeerFunctionsSupported OID value, configure state conditions and alerts, and monitor any Huawei carrier Ethernet switch/router (802.1ag CFM Ethernet OAM) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.5huaweiMgmtHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25huaweiDatacommHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.5.25.136hwEthOamHUAWEI-ETHOAM-MIB
1.3.6.1.4.1.2011.5.25.136.1hwEthOamMibHUAWEI-ETHOAM-MIB
1.3.6.1.4.1.2011.5.25.136.1.2hwEthOam3ahHUAWEI-ETHOAM-MIB
1.3.6.1.4.1.2011.5.25.136.1.2.2hwDot3ahEfmObjectHUAWEI-ETHOAM-MIB
1.3.6.1.4.1.2011.5.25.136.1.2.2.3hwDot3ahEfmPeerTableHUAWEI-ETHOAM-MIB
1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1hwDot3ahEfmPeerEntryHUAWEI-ETHOAM-MIB
1.3.6.1.4.1.2011.5.25.136.1.2.2.3.1.7hwDot3ahEfmPeerFunctionsSupportedHUAWEI-ETHOAM-MIB