All MIBs › HUAWEI-ENT-VOICE-PORT-MIB › hwEntVe1PortErrAlarmSwitch
hwEntVe1PortErrAlarmSwitch
Module: HUAWEI-ENT-VOICE-PORT-MIB
OID (symbolic): HUAWEI-ENT-VOICE-PORT-MIB::hwEntVe1PortErrAlarmSwitch
OID (numeric): 1.3.6.1.4.1.2011.5.25.252.5.1.7
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: Indicates ve1 error alarm switches, from left to right, each bit respresent a switch. 0 means disable, 1 means enable. bit0: report pcm line fault alarm. bit1: when error rate reached ULF(Unconditional Line Failure) threshold, report pcm line fault alarm. bit2: when error rate reached OLF(Optional Line Failure) threshold, report pcm line fault alarm. bit3: when error rate reached LDT(Line Disturbance Transient Event) threshold, report ve1 digital line transient event alarm. bit4: when E1 frame slip frequency exceeded in observation interval reached degraded threshold, report event alarm. bit5: when any line temporary event occurs, report event alarm. Default: 111000
What is hwEntVe1PortErrAlarmSwitch?
A bitmask controlling which E1 line-quality alarms the VE1 port reports: bit0 basic PCM line fault, bit1 fault at the ULF (Unconditional Line Failure) threshold, bit2 fault at the OLF (Optional Line Failure) threshold, bit3 transient event at the LDT threshold, bit4 degraded-frame-slip event, bit5 any temporary line event, where 1 enables that specific alarm (default 111000). An admin tailors this bitmask to reduce alarm noise from marginal-but-tolerable line conditions while keeping hard-fault alarms enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.252.5.1.7 snmpwalk -v2c -c public <target> HUAWEI-ENT-VOICE-PORT-MIB::hwEntVe1PortErrAlarmSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.252.5.1.7.1 snmpget -v2c -c public <target> HUAWEI-ENT-VOICE-PORT-MIB::hwEntVe1PortErrAlarmSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.25.252.5.1.7.1 s <value>
Start monitoring Huawei enterprise voice gateway (analog FXS voice ports) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-ENT-VOICE-PORT-MIB::hwEntVe1PortErrAlarmSwitch OID value, configure state conditions and alerts, and monitor any Huawei enterprise voice gateway (analog FXS voice ports) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.252 | hwEntVoicePortMIB | HUAWEI-ENT-VOICE-PORT-MIB |
| 1.3.6.1.4.1.2011.5.25.252.5 | hwEntVe1PortConfigTable | HUAWEI-ENT-VOICE-PORT-MIB |
| 1.3.6.1.4.1.2011.5.25.252.5.1 | hwEntVe1PortConfigEntry | HUAWEI-ENT-VOICE-PORT-MIB |
| 1.3.6.1.4.1.2011.5.25.252.5.1.7 | hwEntVe1PortErrAlarmSwitch | HUAWEI-ENT-VOICE-PORT-MIB |