All MIBs › HUAWEI-DHCPR-MIB › hwDHCPRelayCycleStatus
hwDHCPRelayCycleStatus
Module: HUAWEI-DHCPR-MIB
OID (symbolic): HUAWEI-DHCPR-MIB::hwDHCPRelayCycleStatus
OID (numeric): 1.3.6.1.4.1.2011.5.7.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Status of DHCP relay cycle mode, when the value is 0, cycle with the serveral DHCP servers addresses, when the value is 1, use one same DHCP server.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.7.1.1.3 snmpwalk -v2c -c public <target> HUAWEI-DHCPR-MIB::hwDHCPRelayCycleStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.7.1.1.3.1 snmpget -v2c -c public <target> HUAWEI-DHCPR-MIB::hwDHCPRelayCycleStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.7.1.1.3.1 i <value>
Start monitoring Huawei router or switch acting as DHCP relay agent with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-DHCPR-MIB::hwDHCPRelayCycleStatus OID value, configure state conditions and alerts, and monitor any Huawei router or switch acting as DHCP relay agent from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.7 | hwDhcp | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.7.1 | hwDHCPRelayMib | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.7.1.1 | hwDHCPRelayMibObject | HUAWEI-DHCPR-MIB |
| 1.3.6.1.4.1.2011.5.7.1.1.3 | hwDHCPRelayCycleStatus | HUAWEI-DHCPR-MIB |