HUAWEI-ADSLNNI-MIB :: hwadslnniSCStatusGainAlloc

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHUAWEI-ADSLNNI-MIBhwadslnniSCStatusGainAlloc

hwadslnniSCStatusGainAlloc

Module: HUAWEI-ADSLNNI-MIB

OID (symbolic): HUAWEI-ADSLNNI-MIB::hwadslnniSCStatusGainAlloc

OID (numeric): 1.3.6.1.4.1.2011.6.143.1.1.5.1.4

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. The number of utilized octets on downstream direction depends on NSCds, and on upstream direction it depends on NSCus. This value is referred here as NSC. Value i (0 <= i < NSC) is in the range 0 to 4093 to indicate that the respective downstream or upstream sub-carrier i has the same amount of gain value. The gain value is represented as a multiple of 1/512 on linear scale. Each value in this array is 16 bits wide and is stored in big endian format.

What is hwadslnniSCStatusGainAlloc?

This read-only octet string (up to 1024 bytes, 16-bit big-endian values per sub-carrier) reports the gain allocated to each sub-carrier, expressed as a multiple of 1/512 on a linear scale, for up to 512 sub-carriers. It's a fine-grained diagnostic used alongside the bit and SNR arrays when a vendor or support engineer needs to verify the modem's per-tone power shaping in detail.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.143.1.1.5.1.4
snmpwalk -v2c -c public <target> HUAWEI-ADSLNNI-MIB::hwadslnniSCStatusGainAlloc

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.143.1.1.5.1.4.1
snmpget -v2c -c public <target> HUAWEI-ADSLNNI-MIB::hwadslnniSCStatusGainAlloc.1

Start monitoring Huawei DSLAM/broadband access node (ADSL network-to-network uplink) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-ADSLNNI-MIB::hwadslnniSCStatusGainAlloc OID value, configure state conditions and alerts, and monitor any Huawei DSLAM/broadband access node (ADSL network-to-network uplink) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.6huaweiUtilityHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.6.143hwAdslnniMIBHUAWEI-ADSLNNI-MIB
1.3.6.1.4.1.2011.6.143.1hwAdslnniHUAWEI-ADSLNNI-MIB
1.3.6.1.4.1.2011.6.143.1.1hwAdslnniCfgHUAWEI-ADSLNNI-MIB
1.3.6.1.4.1.2011.6.143.1.1.5hwAdslnniSCStatusTableHUAWEI-ADSLNNI-MIB
1.3.6.1.4.1.2011.6.143.1.1.5.1hwAdslnniSCStatusEntryHUAWEI-ADSLNNI-MIB
1.3.6.1.4.1.2011.6.143.1.1.5.1.4hwadslnniSCStatusGainAllocHUAWEI-ADSLNNI-MIB