All MIBs › HUAWEI-ADSLNNI-MIB › hwadslnniChStatusAtmStatus
hwadslnniChStatusAtmStatus
Module: HUAWEI-ADSLNNI-MIB
OID (symbolic): HUAWEI-ADSLNNI-MIB::hwadslnniChStatusAtmStatus
OID (numeric): 1.3.6.1.4.1.2011.6.143.1.1.4.1.6
Node type: OBJECT-TYPE
Type: Adsl2ChAtmStatus
Access: read-only
Description: Indicates current state (existing failures) of the ADSL channel in case its Data Path is ATM. This is a bit-map of possible conditions. The various bit positions are: noFailure(0) - This bit position positively reports that no defect or failure exists. noCellDelineation(1) - The link was successfully initialized, but cell delineation was never acquired on the associated ATM data path. lossOfCellDelineation(2) - Loss of cell delineation on the associated ATM data path. In case the channel is not of ATM Data Path the object is set to '0'.
What is hwadslnniChStatusAtmStatus?
This read-only bitmap reports current ATM-path failure conditions on the bearer channel -- noFailure, noCellDelineation (never acquired), or lossOfCellDelineation -- and is forced to 0 when the channel isn't carrying an ATM data path at all. Seeing noCellDelineation here even though the physical line is synced points to an ATM-layer mismatch rather than a Layer-1 problem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.143.1.1.4.1.6 snmpwalk -v2c -c public <target> HUAWEI-ADSLNNI-MIB::hwadslnniChStatusAtmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.143.1.1.4.1.6.1 snmpget -v2c -c public <target> HUAWEI-ADSLNNI-MIB::hwadslnniChStatusAtmStatus.1
Start monitoring Huawei DSLAM/broadband access node (ADSL network-to-network uplink) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-ADSLNNI-MIB::hwadslnniChStatusAtmStatus OID value, configure state conditions and alerts, and monitor any Huawei DSLAM/broadband access node (ADSL network-to-network uplink) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.143 | hwAdslnniMIB | HUAWEI-ADSLNNI-MIB |
| 1.3.6.1.4.1.2011.6.143.1 | hwAdslnni | HUAWEI-ADSLNNI-MIB |
| 1.3.6.1.4.1.2011.6.143.1.1 | hwAdslnniCfg | HUAWEI-ADSLNNI-MIB |
| 1.3.6.1.4.1.2011.6.143.1.1.4 | hwAdslnniChannelStatusTable | HUAWEI-ADSLNNI-MIB |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1 | hwAdslnniChannelStatusEntry | HUAWEI-ADSLNNI-MIB |
| 1.3.6.1.4.1.2011.6.143.1.1.4.1.6 | hwadslnniChStatusAtmStatus | HUAWEI-ADSLNNI-MIB |