All MIBs › HPN-ICF-RMON-EXT-MIB › hpnicfprialarmValue
hpnicfprialarmValue
Module: HPN-ICF-RMON-EXT-MIB
OID (symbolic): HPN-ICF-RMON-EXT-MIB::hpnicfprialarmValue
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds.
The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
What is hpnicfprialarmValue?
This read-only value reports the calculated statistic from the last completed sampling period, computed per hpnicfprialarmSampleType, and is the value actually compared against the rising/falling thresholds; it isn't available until the current period completes and then persists until the next one finishes. An admin reads this to see the actual measured value that led to (or didn't lead to) a threshold-crossing alarm on this entry. For example, checking hpnicfprialarmValue after a rising alarm fires confirms the exact sampled value that crossed the configured hpnicfprialarmRisingThreshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.6 snmpwalk -v2c -c public <target> HPN-ICF-RMON-EXT-MIB::hpnicfprialarmValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.6.1 snmpget -v2c -c public <target> HPN-ICF-RMON-EXT-MIB::hpnicfprialarmValue.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfprialarmValue.1
Start monitoring HP/H3C Comware switch or router (extended RMON-style alarms) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-RMON-EXT-MIB::hpnicfprialarmValue OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch or router (extended RMON-style alarms) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8 | hpnicfRhw | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.4 | hpnicfrmonExtend | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.4.4 | hpnicfperformance | HPN-ICF-RMON-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.4.4.1 | hpnicfprialarmTable | HPN-ICF-RMON-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1 | hpnicfprialarmEntry | HPN-ICF-RMON-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.6 | hpnicfprialarmValue | HPN-ICF-RMON-EXT-MIB |