All MIBs › HPN-ICF-PEX-MIB › hpnicfPexPhyPortStatus
hpnicfPexPhyPortStatus
Module: HPN-ICF-PEX-MIB
OID (symbolic): HPN-ICF-PEX-MIB::hpnicfPexPhyPortStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.129.2.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Status of the physical port that is bound to a PEX port. The following are status values: unknown: The physical port is not bound to any PEX port. down: The physical port is link down. blocked: The physical port is blocked and cannot forward traffic. forwarding: The physical port can forwarding traffic.
What is hpnicfPexPhyPortStatus?
This reports the state of a physical uplink port with respect to its PEX port binding: unknown, down, blocked, or forwarding. Admins use it to verify that an uplink meant to carry traffic to a port extender is actually up and forwarding, rather than link-down or stuck in a blocked (e.g. spanning-tree) state. A port reporting blocked(3) instead of forwarding(4) after being bound to a PEX port would explain why that extender isn't passing traffic even though it's physically connected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.129.2.2.1.1 snmpwalk -v2c -c public <target> HPN-ICF-PEX-MIB::hpnicfPexPhyPortStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.129.2.2.1.1.1 snmpget -v2c -c public <target> HPN-ICF-PEX-MIB::hpnicfPexPhyPortStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfPexPhyPortStatus.1
Start monitoring HP/HPE Comware switch with Port Extender (PEX) modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-PEX-MIB::hpnicfPexPhyPortStatus OID value, configure state conditions and alerts, and monitor any HP/HPE Comware switch with Port Extender (PEX) modules from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.129 | hpnicfPex | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.129.2 | hpnicfPexTable | HPN-ICF-PEX-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.129.2.2 | hpnicfPexPhyPortTable | HPN-ICF-PEX-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.129.2.2.1 | hpnicfPexPhyPortEntry | HPN-ICF-PEX-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.129.2.2.1.1 | hpnicfPexPhyPortStatus | HPN-ICF-PEX-MIB |