All MIBs › HPN-ICF-LswMix-MIB › hpnicfLswCrossBarStatus
hpnicfLswCrossBarStatus
Module: HPN-ICF-LswMix-MIB
OID (symbolic): HPN-ICF-LswMix-MIB::hpnicfLswCrossBarStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode.
What is hpnicfLswCrossBarStatus?
This object reports whether the crossbar switching fabric on this slot's MPU board is currently acting as master or standby. It tracks the fabric's own role, which notably can show master(1) on both MPU boards at once if the chassis is running in load-balance mode rather than a single active/standby scheme. For example, seeing both slots report their crossbar status as master(1) tells the admin the switch is operating in load-balance mode, not a simple failover configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.2 snmpwalk -v2c -c public <target> HPN-ICF-LswMix-MIB::hpnicfLswCrossBarStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.2.1 snmpget -v2c -c public <target> HPN-ICF-LswMix-MIB::hpnicfLswCrossBarStatus.1
Start monitoring HP/H3C Comware-based modular Layer 2 switch (MPU redundancy/crossbar fabric) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-LswMix-MIB::hpnicfLswCrossBarStatus OID value, configure state conditions and alerts, and monitor any HP/H3C Comware-based modular Layer 2 switch (MPU redundancy/crossbar fabric) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8 | hpnicfRhw | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35 | hpnicflswCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.35.17 | hpnicfLswMix | HPN-ICF-LswMix-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5 | hpnicfLswXSlotTable | HPN-ICF-LswMix-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1 | hpnicfLswXSlotEntry | HPN-ICF-LswMix-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.2 | hpnicfLswCrossBarStatus | HPN-ICF-LswMix-MIB |