HPN-ICF-LswINF-MIB :: hpnicfifVLANTrunkAllowListLow

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › HPN-ICF-LswINF-MIB › hpnicfifVLANTrunkAllowListLow

hpnicfifVLANTrunkAllowListLow

Module: HPN-ICF-LswINF-MIB

OID (symbolic): HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkAllowListLow

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.6

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.

What is hpnicfifVLANTrunkAllowListLow?

Holds a bitmap of which VLANs 1-2048 are configured to be allowed on this trunk port, one bit per VLAN. Unlike the pass list, this is the administratively configured permission set rather than the real-time forwarding state, and is the low-numbered half paired with hpnicfifVLANTrunkAllowListHigh.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.6
snmpwalk -v2c -c public <target> HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkAllowListLow

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.6.1
snmpget -v2c -c public <target> HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkAllowListLow.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.6.1 s <value>

Start monitoring HP/H3C Comware-based ICF switch (Layer 2 port attributes/storm suppression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkAllowListLow OID value, configure state conditions and alerts, and monitor any HP/H3C Comware-based ICF switch (Layer 2 port attributes/storm suppression) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.8hpnicfRhwHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35hpnicflswCommonHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.8.35.5hpnicfLswL2InfMibHPN-ICF-LswINF-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1hpnicfLswL2InfMibObjectHPN-ICF-LswINF-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3hpnicfifVLANTrunkStatusTableHPN-ICF-LswINF-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1hpnicfifVLANTrunkStatusEntryHPN-ICF-LswINF-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.6hpnicfifVLANTrunkAllowListLowHPN-ICF-LswINF-MIB