HPN-ICF-LswINF-MIB :: hpnicfifHybridUnTaggedVlanListLow

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › HPN-ICF-LswINF-MIB › hpnicfifHybridUnTaggedVlanListLow

hpnicfifHybridUnTaggedVlanListLow

Module: HPN-ICF-LswINF-MIB

OID (symbolic): HPN-ICF-LswINF-MIB::hpnicfifHybridUnTaggedVlanListLow

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.4

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.

What is hpnicfifHybridUnTaggedVlanListLow?

Holds a bitmap identifying which of VLANs 1-2048 this hybrid port carries as untagged traffic, one bit per VLAN (bit set means that VLAN is untagged on this port). It's the low-numbered half of the hybrid port's untagged-VLAN membership, paired with hpnicfifHybridUnTaggedVlanListHigh.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.4
snmpwalk -v2c -c public <target> HPN-ICF-LswINF-MIB::hpnicfifHybridUnTaggedVlanListLow

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.4.1
snmpget -v2c -c public <target> HPN-ICF-LswINF-MIB::hpnicfifHybridUnTaggedVlanListLow.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.4.1 s <value>

Start monitoring HP/H3C Comware-based ICF switch (Layer 2 port attributes/storm suppression) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-LswINF-MIB::hpnicfifHybridUnTaggedVlanListLow OID value, configure state conditions and alerts, and monitor any HP/H3C Comware-based ICF switch (Layer 2 port attributes/storm suppression) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.8hpnicfRhwHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35hpnicflswCommonHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.8.35.1hpnicfLswExtInterfaceHPN-ICF-LswINF-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3hpnicfifHybridPortTableHPN-ICF-LswINF-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1hpnicfifHybridPortEntryHPN-ICF-LswINF-MIB
1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.4hpnicfifHybridUnTaggedVlanListLowHPN-ICF-LswINF-MIB