HPN-ICF-LI-MIB :: hpnicfLIMACStreamFields

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HPN-ICF-LI-MIB › hpnicfLIMACStreamFields

hpnicfLIMACStreamFields

Module: HPN-ICF-LI-MIB

OID (symbolic): HPN-ICF-LI-MIB::hpnicfLIMACStreamFields

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.1

Node type: OBJECT-TYPE

Type: Bits

Access: read-write

Description: This object displays what attributes will be compared to identify traffic. interface: indicates that traffic on the stated interface is to be intercepted dstMacAddress: indicates that traffic destined to a given address should be intercepted srcMacAddress: indicates that traffic sourced from a given address should be intercepted ethernetPid: indicates that traffic with a stated Ethernet Protocol Identifier should be intercepted dSap: indicates that traffic with an certain 802.2 LLC Destination SAP should be intercepted sSap: indicates that traffic with an certain 802.2 LLC Source SAP should be intercepted

At least one of the bits has to be set in order to activate an entry. If multiple bits are set, traffic to be intercepted must be satisfied with all set attributes.

What is hpnicfLIMACStreamFields?

A bitmask selecting which Layer-2 attributes (interface, source/destination MAC, Ethernet protocol ID, or 802.2 SAP values) must all match for this MAC-based intercept to fire; at least one bit must be set to activate the entry.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.1
snmpwalk -v2c -c public <target> HPN-ICF-LI-MIB::hpnicfLIMACStreamFields

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.1.1
snmpget -v2c -c public <target> HPN-ICF-LI-MIB::hpnicfLIMACStreamFields.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.1.1 s <value>

Start monitoring HP/H3C Comware carrier-grade router (Lawful Interception mediation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-LI-MIB::hpnicfLIMACStreamFields OID value, configure state conditions and alerts, and monitor any HP/H3C Comware carrier-grade router (Lawful Interception mediation) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.111hpnicfLIHPN-ICF-LI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.111.3hpnicfLIMACStreamHPN-ICF-LI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.111.3.1hpnicfLIMACStreamObjectsHPN-ICF-LI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1hpnicfLIMACStreamTableHPN-ICF-LI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1hpnicfLIMACStreamEntryHPN-ICF-LI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.1hpnicfLIMACStreamFieldsHPN-ICF-LI-MIB