All MIBs › HPN-ICF-IPSEC-MONITOR-MIB › hpnicfIPSecTrafficRemoteAddr2
hpnicfIPSecTrafficRemoteAddr2
Module: HPN-ICF-IPSEC-MONITOR-MIB
OID (symbolic): HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficRemoteAddr2
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.8
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: Single IP address, then this is the value of the IP address. If the remote peer type is IP subnet, then this is the value of the subnet mask. If the remote peer type is IP address range, then this is the value of ending IP address of the range.
What is hpnicfIPSecTrafficRemoteAddr2?
The second address value of the remote traffic selector — the source DESCRIPTION text is truncated/copy-edited in this MIB, but by parallel with hpnicfIPSecTrafficLocalAddr2 it represents the same host address again (single-address type), the subnet mask (subnet type), or the range end (address-range type) for the remote side.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.8 snmpwalk -v2c -c public <target> HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficRemoteAddr2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.8.1 snmpget -v2c -c public <target> HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficRemoteAddr2.1
Start monitoring HP/Comware VPN router/security gateway (IPsec tunnel statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficRemoteAddr2 OID value, configure state conditions and alerts, and monitor any HP/Comware VPN router/security gateway (IPsec tunnel statistics) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.7 | hpnicfIPSecMonitor | HPN-ICF-IPSEC-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1 | hpnicfIPSecObjects | HPN-ICF-IPSEC-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4 | hpnicfIPSecTrafficTable | HPN-ICF-IPSEC-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1 | hpnicfIPSecTrafficEntry | HPN-ICF-IPSEC-MONITOR-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.8 | hpnicfIPSecTrafficRemoteAddr2 | HPN-ICF-IPSEC-MONITOR-MIB |