All MIBs › HPN-ICF-FCOE-MODE-MIB › hpnicfFcoeModeCfgMode
hpnicfFcoeModeCfgMode
Module: HPN-ICF-FCOE-MODE-MIB
OID (symbolic): HPN-ICF-FCOE-MODE-MIB::hpnicfFcoeModeCfgMode
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.135.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies the FCoE modes the switch supports.
The object has four available values: 1: non-FCoE mode. 2: FCF mode. 3: NPV mode. 4: Transit mode.
The switch mode can only be converted from non-FCoE mode to one of FCoE modes, or vice versa, but cannot be converted directly among the other three FCoE modes.
To convert among the other three FCoE modes, the switch should first be converted to non-FCoE mode. After converting the switch to non-FCoE mode, FCoE-related configurations in the original FCoE mode will be cleared.
What is hpnicfFcoeModeCfgMode?
This value configures the switch's FCoE operating mode: non-FCoE, FCF, NPV, or Transit, with the constraint that only a direct conversion between non-FCoE mode and one FCoE mode is allowed, never a direct switch between two different FCoE modes. A storage-network administrator sets this when preparing the switch for converged Ethernet/Fibre-Channel storage traffic, keeping in mind that hopping between the three FCoE modes requires transiting back through non-FCoE mode first, which clears the previous mode's FCoE settings. For example, converting a switch from Transit mode to FCF mode requires first setting this to non-FCoE(1), then to fcf(2), rather than a single direct change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.135.1.1 snmpwalk -v2c -c public <target> HPN-ICF-FCOE-MODE-MIB::hpnicfFcoeModeCfgMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.135.1.1.1 snmpget -v2c -c public <target> HPN-ICF-FCOE-MODE-MIB::hpnicfFcoeModeCfgMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.135.1.1.1 i <value>
Start monitoring HP/Comware FCoE-capable data-center switch (FCF/NPV/gateway mode) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-FCOE-MODE-MIB::hpnicfFcoeModeCfgMode OID value, configure state conditions and alerts, and monitor any HP/Comware FCoE-capable data-center switch (FCF/NPV/gateway mode) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.135 | hpnicfFcoeMode | HPN-ICF-FCOE-MODE-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.135.1 | hpnicfFcoeModeMibObjects | HPN-ICF-FCOE-MODE-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.135.1.1 | hpnicfFcoeModeCfgMode | HPN-ICF-FCOE-MODE-MIB |