All MIBs › HPN-ICF-FC-ZONE-SERVER-MIB › hpnicfFcZsServerLastResult
hpnicfFcZsServerLastResult
Module: HPN-ICF-FC-ZONE-SERVER-MIB
OID (symbolic): HPN-ICF-FC-ZONE-SERVER-MIB::hpnicfFcZsServerLastResult
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.127.9.1.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current operational status of the latest configuration in this VSAN:
'none' - No corresponding operation has been performed yet. 'success' - The configuration was performed successfully. 'busy' - The configuration was performed unsuccessfully, because the system is busy with another zoning operation. 'noSupportInFabric' - The configuration was performed unsuccessfully, because one or more switches in this Fabric don't support Enhanced zoning. 'noSupportInBasic' - The configuration was performed unsuccessfully, because it is not supported in Basic mode. 'noSupportInEnhanced' - The configuration was performed unsuccessfully, because it is not supported in Enhanced mode. 'activeZoneSetTooBig' - The configuration was performed unsuccessfully, because the Active Zone Set is too large to be supported. 'otherFault' - The configuration was performed unsuccessfully for other reasons.
What is hpnicfFcZsServerLastResult?
Reports the outcome of the most recent zoning configuration operation on this VSAN, e.g. success(2), busy(3) if another zoning operation was in progress, or activeZoneSetTooBig(7) if the zone set exceeded switch capacity. Admins check this after a configuration change to confirm it actually took effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.127.9.1.1.1.1.6 snmpwalk -v2c -c public <target> HPN-ICF-FC-ZONE-SERVER-MIB::hpnicfFcZsServerLastResult
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.127.9.1.1.1.1.6.1 snmpget -v2c -c public <target> HPN-ICF-FC-ZONE-SERVER-MIB::hpnicfFcZsServerLastResult.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfFcZsServerLastResult.1
Start monitoring HP/H3C Comware Fibre Channel SAN switch (FC zoning) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-FC-ZONE-SERVER-MIB::hpnicfFcZsServerLastResult OID value, configure state conditions and alerts, and monitor any HP/H3C Comware Fibre Channel SAN switch (FC zoning) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127 | hpnicfSan | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.127.9 | hpnicfFcZoneServer | HPN-ICF-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.9.1 | hpnicfFcZoneMibObjects | HPN-ICF-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.9.1.1 | hpnicfFcZsConfiguration | HPN-ICF-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.9.1.1.1 | hpnicfFcZsServerTable | HPN-ICF-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.9.1.1.1.1 | hpnicfFcZsServerEntry | HPN-ICF-FC-ZONE-SERVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.127.9.1.1.1.1.6 | hpnicfFcZsServerLastResult | HPN-ICF-FC-ZONE-SERVER-MIB |