HPN-ICF-EPON-UNI-MIB :: hpnicfEponUniVLANTrunkAllowListLow

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HPN-ICF-EPON-UNI-MIB › hpnicfEponUniVLANTrunkAllowListLow

hpnicfEponUniVLANTrunkAllowListLow

Module: HPN-ICF-EPON-UNI-MIB

OID (symbolic): HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListLow

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.9

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans. the vlan is not allowed if its bit has a value of '0'.

What is hpnicfEponUniVLANTrunkAllowListLow?

A bitmap where each bit represents one VLAN (the first octet covers VLANs 1-8, the second 9-16, and so on) that is permitted on this trunk UNI port; a '1' bit allows that VLAN through, a '0' blocks it, letting an admin restrict which of the lower-numbered VLANs a customer's trunk port can carry.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.9
snmpwalk -v2c -c public <target> HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListLow

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.9.1
snmpget -v2c -c public <target> HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListLow.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.9.1 s <value>

Start monitoring HP Networking EPON ONUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListLow OID value, configure state conditions and alerts, and monitor any HP Networking EPON ONUs from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42hpnicfEponHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.42.5hpnicfEponUniHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1hpnicfEponUniSysManHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1hpnicfEponUniSysManTableHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1hpnicfEponUniSysManEntryHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.9hpnicfEponUniVLANTrunkAllowListLowHPN-ICF-EPON-UNI-MIB