HPN-ICF-EPON-UNI-MIB :: hpnicfEponUniVLANTrunkAllowListHigh

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HPN-ICF-EPON-UNI-MIB › hpnicfEponUniVLANTrunkAllowListHigh

hpnicfEponUniVLANTrunkAllowListHigh

Module: HPN-ICF-EPON-UNI-MIB

OID (symbolic): HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListHigh

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.10

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 2049 through 2056, the second octet specifying vlans 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered vlan, and the least significant bit represents the lowest numbered vlan. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans; the vlan is not allowed if its bit has a value of '0'.

What is hpnicfEponUniVLANTrunkAllowListHigh?

The counterpart to hpnicfEponUniVLANTrunkAllowListLow covering the higher VLAN range (starting at VLAN 2049), using the same one-bit-per-VLAN scheme to control which upper-numbered VLANs are allowed on this trunk UNI port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.10
snmpwalk -v2c -c public <target> HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListHigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.10.1
snmpget -v2c -c public <target> HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListHigh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.10.1 s <value>

Start monitoring HP Networking EPON ONUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListHigh OID value, configure state conditions and alerts, and monitor any HP Networking EPON ONUs from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42hpnicfEponHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.42.5hpnicfEponUniHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1hpnicfEponUniSysManHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1hpnicfEponUniSysManTableHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1hpnicfEponUniSysManEntryHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.10hpnicfEponUniVLANTrunkAllowListHighHPN-ICF-EPON-UNI-MIB