HPN-ICF-EPON-UNI-MIB :: hpnicfEponUniMirrorInboundPortList

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HPN-ICF-EPON-UNI-MIB › hpnicfEponUniMirrorInboundPortList

hpnicfEponUniMirrorInboundPortList

Module: HPN-ICF-EPON-UNI-MIB

OID (symbolic): HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorInboundPortList

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: UNI inbound port list. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered UNI, and the least significant bit represents the lowest numbered UNI. Thus, each UNI port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is allowed in the set of ports. the port is not allowed if its bit has a value of '0'.

What is hpnicfEponUniMirrorInboundPortList?

A bitmap identifying which UNI ports' inbound traffic is mirrored in this mirror group, using the same one-bit-per-port scheme as the VLAN allow lists (first octet = ports 1-8, etc.) — set the bits for the ports you want to capture for troubleshooting or lawful-intercept purposes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.2
snmpwalk -v2c -c public <target> HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorInboundPortList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.2.1
snmpget -v2c -c public <target> HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorInboundPortList.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.2.1 s <value>

Start monitoring HP Networking EPON ONUs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorInboundPortList OID value, configure state conditions and alerts, and monitor any HP Networking EPON ONUs from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42hpnicfEponHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.42.5hpnicfEponUniHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1hpnicfEponUniSysManHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13hpnicfEponUniMirrorGroupTableHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1hpnicfEponUniMirrorGroupEntryHPN-ICF-EPON-UNI-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.2hpnicfEponUniMirrorInboundPortListHPN-ICF-EPON-UNI-MIB