HPN-ICF-EFM-COMMON-MIB :: hpnicfDot3OamUnsupportedCodesRx

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-EFM-COMMON-MIBhpnicfDot3OamUnsupportedCodesRx

hpnicfDot3OamUnsupportedCodesRx

Module: HPN-ICF-EFM-COMMON-MIB

OID (symbolic): HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamUnsupportedCodesRx

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.16

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: A count of the number of OAMPDUs received on this interface with an unsupported op-code.

An unsupported opcode OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the opcode for a function that is not supported by the device.

Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.

What is hpnicfDot3OamUnsupportedCodesRx?

This counts OAMPDUs received on this interface using an opcode this device doesn't support. Admins watch for a rising count here as a sign the peer device is running a newer or vendor-extended OAM feature set that this local implementation can't process.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.16
snmpwalk -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamUnsupportedCodesRx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.16.1
snmpget -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamUnsupportedCodesRx.1

Start monitoring HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamUnsupportedCodesRx OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42hpnicfEponHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.42.3hpnicfEfmOamMIBHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1hpnicfDot3OamMIBHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4hpnicfDot3OamStatsTableHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1hpnicfDot3OamStatsEntryHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.16hpnicfDot3OamUnsupportedCodesRxHPN-ICF-EFM-COMMON-MIB