All MIBs › HPN-ICF-EFM-COMMON-MIB › hpnicfDot3OamMode
hpnicfDot3OamMode
Module: HPN-ICF-EFM-COMMON-MIB
OID (symbolic): HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamMode
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object configures the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These two modes differ in that active mode provides additional capabilities to initiate monitoring activities with the remote OAM peer entity, while passive mode generally waits for the peer to initiate OAM actions with it. As an example, an active OAM entity can put the remote OAM entity in a loopback state, where a passive OAM entity cannot.
Changing this value results in incrementing the configuration revision field of locally generated OAMPDUs (30.3.6.1.12) and potentially re-doing the OAM discovery process if the hpnicfDot3OamOperStatus was already operational(9).
What is hpnicfDot3OamMode?
This sets whether this interface's OAM entity operates in active(1) mode, which can initiate monitoring actions like remote loopback against the peer, or passive(2) mode, which generally only responds to actions the peer initiates. Changing this value bumps the configuration-revision field in outgoing OAMPDUs and can restart OAM discovery if the link was already operational.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.3 snmpwalk -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.3.1 snmpget -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.3.1 i <value>
Start monitoring HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamMode OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42 | hpnicfEpon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3 | hpnicfEfmOamMIB | HPN-ICF-EFM-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1 | hpnicfDot3OamMIB | HPN-ICF-EFM-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1 | hpnicfDot3OamTable | HPN-ICF-EFM-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1 | hpnicfDot3OamEntry | HPN-ICF-EFM-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.3 | hpnicfDot3OamMode | HPN-ICF-EFM-COMMON-MIB |