HPN-ICF-EFM-COMMON-MIB :: hpnicfDot3OamLoopbackControlTx

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-EFM-COMMON-MIBhpnicfDot3OamLoopbackControlTx

hpnicfDot3OamLoopbackControlTx

Module: HPN-ICF-EFM-COMMON-MIB

OID (symbolic): HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlTx

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.7

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: A count of the number of Loopback Control OAMPDUs transmitted on this interface.

An Loopback Conrol OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Loopback Control code.

Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.

What is hpnicfDot3OamLoopbackControlTx?

This counts Loopback Control OAMPDUs transmitted on this interface, the frames used to start or stop remote OAM loopback with the peer. Admins can check this counter to confirm a hpnicfDot3OamLoopbackCommand write actually generated an outgoing control frame.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.7
snmpwalk -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlTx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.7.1
snmpget -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlTx.1

Start monitoring HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlTx OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42hpnicfEponHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.42.3hpnicfEfmOamMIBHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1hpnicfDot3OamMIBHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4hpnicfDot3OamStatsTableHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1hpnicfDot3OamStatsEntryHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.7hpnicfDot3OamLoopbackControlTxHPN-ICF-EFM-COMMON-MIB