HPN-ICF-EFM-COMMON-MIB :: hpnicfDot3OamLoopbackControlRx

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-EFM-COMMON-MIBhpnicfDot3OamLoopbackControlRx

hpnicfDot3OamLoopbackControlRx

Module: HPN-ICF-EFM-COMMON-MIB

OID (symbolic): HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlRx

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.8

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: A count of the number of Loopback Control OAMPDUs transmitted on this interface.

An Loopback Control OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Loopback Control code.

Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.

What is hpnicfDot3OamLoopbackControlRx?

This counts Loopback Control OAMPDUs received on this interface, i.e. loopback start/stop requests coming from the peer. Admins watch for unexpected increases here, which would indicate the remote device is attempting to initiate loopback on this link (relevant alongside hpnicfDot3OamLoopbackIgnoreRx's ignore/process setting).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.8
snmpwalk -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlRx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.8.1
snmpget -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlRx.1

Start monitoring HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlRx OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42hpnicfEponHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.42.3hpnicfEfmOamMIBHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1hpnicfDot3OamMIBHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4hpnicfDot3OamStatsTableHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1hpnicfDot3OamStatsEntryHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.8hpnicfDot3OamLoopbackControlRxHPN-ICF-EFM-COMMON-MIB