All MIBs › HPN-ICF-EFM-COMMON-MIB › hpnicfDot3OamLoopbackCommand
hpnicfDot3OamLoopbackCommand
Module: HPN-ICF-EFM-COMMON-MIB
OID (symbolic): HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackCommand
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute initiates or terminates remote loopback with an OAM peer. Writing startRemoteLoopback(2) to this attribute cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags set. Writing stopRemoteLoopback(3) to this attribute will cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags cleared. Writing noLoopback to this attribute has no effect.
Writes to this attribute are ignored unless the OAM status of this interface is 'operational' (hpnicfDot3OamOperStatus).
The attribute always returns noLoopback on a read. To determine the loopback status, use the attribute hpnicfDot3OamLoopbackStatus.
What is hpnicfDot3OamLoopbackCommand?
This write-only-in-effect control initiates or terminates remote OAM loopback with the peer: noLoopback(1, no effect, and always what reads back), startRemoteLoopback(2, sends a loopback-enable OAMPDU to the peer), or stopRemoteLoopback(3, sends a loopback-disable OAMPDU). Writes are ignored unless hpnicfDot3OamOperStatus is 'operational'; admins should recognize this is a disruptive test that stops normal traffic on the peer's interface while active, and must check hpnicfDot3OamLoopbackStatus (not this object) to see the actual loopback state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1.1 snmpwalk -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1.1.1 snmpget -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1.1.1 i <value>
Start monitoring HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackCommand OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42 | hpnicfEpon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3 | hpnicfEfmOamMIB | HPN-ICF-EFM-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1 | hpnicfDot3OamMIB | HPN-ICF-EFM-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3 | hpnicfDot3OamLoopbackTable | HPN-ICF-EFM-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1 | hpnicfDot3OamLoopbackEntry | HPN-ICF-EFM-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1.1 | hpnicfDot3OamLoopbackCommand | HPN-ICF-EFM-COMMON-MIB |