HPN-ICF-EFM-COMMON-MIB :: hpnicfDot3OamAdminState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-EFM-COMMON-MIBhpnicfDot3OamAdminState

hpnicfDot3OamAdminState

Module: HPN-ICF-EFM-COMMON-MIB

OID (symbolic): HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamAdminState

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface.

The hpnicfDot3OamAdminState always starts in the disabled(1) state until an explicity management action or configuration information retained by the system causes a transition to the enabled(2) state. Note that the value of this object is ignored when the interface is not operating in full-duplex mode. OAM is not supported on half-duplex links.

What is hpnicfDot3OamAdminState?

This controls whether 802.3ah Ethernet OAM (Operations, Administration and Maintenance) is enabled(2) or disabled(1, the default at startup) on this interface. Admins must also ensure the interface is running full-duplex, since the value of this object is ignored (OAM is unsupported) on half-duplex links.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.1
snmpwalk -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamAdminState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.1.1
snmpget -v2c -c public <target> HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamAdminState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.1.1 i <value>

Start monitoring HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamAdminState OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch or router (802.3ah Ethernet OAM, first-mile link) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42hpnicfEponHPN-ICF-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.42.3hpnicfEfmOamMIBHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1hpnicfDot3OamMIBHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1hpnicfDot3OamTableHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1hpnicfDot3OamEntryHPN-ICF-EFM-COMMON-MIB
1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.1hpnicfDot3OamAdminStateHPN-ICF-EFM-COMMON-MIB