All MIBs › HPN-ICF-DOT3-EFM-EPON-MIB › hpnicfDot3MpcpAdminState
hpnicfDot3MpcpAdminState
Module: HPN-ICF-DOT3-EFM-EPON-MIB
OID (symbolic): HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpAdminState
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.11
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When selecting the value as True the interface Multi-Point control protocol is enabled. When selecting the value as False the interface acts as if the Multi-point Control protocol does not exist. Reading reflects the state of the attribute and the operation of the Multi-point control protocol mode of the interface. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
What is hpnicfDot3MpcpAdminState?
A read-write TruthValue that turns Multi-Point Control Protocol on (true) or off (false) for this interface, and can be changed at any time (unlike hpnicfDot3MpcpMode). Admins toggle this to administratively enable or disable EPON MPCP signaling on an OLT or ONU port without touching its olt/onu mode setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.11 snmpwalk -v2c -c public <target> HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpAdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.11.1 snmpget -v2c -c public <target> HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpAdminState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.11.1 s <value>
Start monitoring HP/H3C Comware optical access switch (EPON OLT, 802.3ah MPCP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpAdminState OID value, configure state conditions and alerts, and monitor any HP/H3C Comware optical access switch (EPON OLT, 802.3ah MPCP) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42 | hpnicfEpon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.42.2 | hpnicfDot3EfmeponMIB | HPN-ICF-DOT3-EFM-EPON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.2.1 | hpnicfDot3MpcpMIB | HPN-ICF-DOT3-EFM-EPON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1 | hpnicfDot3MpcpObjects | HPN-ICF-DOT3-EFM-EPON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1 | hpnicfDot3MpcpTable | HPN-ICF-DOT3-EFM-EPON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1 | hpnicfDot3MpcpEntry | HPN-ICF-DOT3-EFM-EPON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.11 | hpnicfDot3MpcpAdminState | HPN-ICF-DOT3-EFM-EPON-MIB |