HPN-ICF-DOT11-SA-MIB :: hpnicfDot11SaDrivenRRMSnt

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HPN-ICF-DOT11-SA-MIB › hpnicfDot11SaDrivenRRMSnt

hpnicfDot11SaDrivenRRMSnt

Module: HPN-ICF-DOT11-SA-MIB

OID (symbolic): HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDrivenRRMSnt

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Configure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity.

What is hpnicfDot11SaDrivenRRMSnt?

Sets how sensitive interference-driven RRM is on this radio: low(1) requires more severe interference before triggering a dynamic channel reassignment, while high(3) reacts to smaller increases in interference.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.9
snmpwalk -v2c -c public <target> HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDrivenRRMSnt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.9.1
snmpget -v2c -c public <target> HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDrivenRRMSnt.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.9.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfDot11SaDrivenRRMSnt.1

Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (spectrum analysis) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDrivenRRMSnt OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (spectrum analysis) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75hpnicfDot11HPN-ICF-DOT11-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.75.13hpnicfDot11SaHPN-ICF-DOT11-SA-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1hpnicfDot11SaCfgGroupHPN-ICF-DOT11-SA-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1hpnicfDot11SaCfgTableHPN-ICF-DOT11-SA-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1hpnicfDot11SaCfgEntryHPN-ICF-DOT11-SA-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.9hpnicfDot11SaDrivenRRMSntHPN-ICF-DOT11-SA-MIB