HPN-ICF-DOT11-RRM-MIB :: hpnicfDot11StaInterfNumThreshhd

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-DOT11-RRM-MIBhpnicfDot11StaInterfNumThreshhd

hpnicfDot11StaInterfNumThreshhd

Module: HPN-ICF-DOT11-RRM-MIB

OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11StaInterfNumThreshhd

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.10

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA interference trap will be sent immediately.

What is hpnicfDot11StaInterfNumThreshhd?

Sets the interfering-station count threshold that triggers an SNMP trap once exceeded, with 0 (the default) meaning a trap fires as soon as any interfering station is seen. It applies the same behavior to client stations that the AP-interference threshold applies to neighboring APs, letting admins tune trap sensitivity separately for each source.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.10
snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11StaInterfNumThreshhd

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.10.1
snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11StaInterfNumThreshhd.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.10.1 i <value>

Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11StaInterfNumThreshhd OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75hpnicfDot11HPN-ICF-DOT11-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.75.8hpnicfDot11RRMHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1hpnicfDot11RRMConfigGroupHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1hpnicfDot11RRMGlobalCfgParaHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.10hpnicfDot11StaInterfNumThreshhdHPN-ICF-DOT11-RRM-MIB