All MIBs › HPN-ICF-DOT11-RRM-MIB › hpnicfDot11RRMScanChl
hpnicfDot11RRMScanChl
Module: HPN-ICF-DOT11-RRM-MIB
OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMScanChl
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Set the scan mode. auto: When this option is set, all channels of the country code being set are scanned. all: When this option is set, all the channels of the radio band are scanned.
What is hpnicfDot11RRMScanChl?
Controls which channels the radio scans during RRM channel assessment: auto (the default) limits scanning to the channels permitted for the configured country code, while all scans every channel in the radio band regardless of regulatory allowance. Admins use all mainly for diagnostic scanning, since the radio can't actually operate on channels outside its country code's allowed set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.7 snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMScanChl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.7.1 snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMScanChl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.7.1 i <value>
Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMScanChl OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75 | hpnicfDot11 | HPN-ICF-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8 | hpnicfDot11RRM | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1 | hpnicfDot11RRMConfigGroup | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1 | hpnicfDot11RRMGlobalCfgPara | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.7 | hpnicfDot11RRMScanChl | HPN-ICF-DOT11-RRM-MIB |