HPN-ICF-DOT11-RRM-MIB :: hpnicfDot11RRMPwrProntoRadioElmt

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-DOT11-RRM-MIBhpnicfDot11RRMPwrProntoRadioElmt

hpnicfDot11RRMPwrProntoRadioElmt

Module: HPN-ICF-DOT11-RRM-MIB

OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMPwrProntoRadioElmt

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.7

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Specify the AP and radio that will change power at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of transmit power control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.

What is hpnicfDot11RRMPwrProntoRadioElmt?

Identifies which AP and radio should apply an immediate power change at the next calibration cycle, using the same AP-index/radio-index bit encoding as the channel-change trigger (upper 24 bits AP, low 8 bits radio; 4294967295 for all radios on all APs). This only applies when transmit-power control mode is userTriggered, and reads always return 0.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.7
snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMPwrProntoRadioElmt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.7.1
snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMPwrProntoRadioElmt.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.7.1 i <value>

Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMPwrProntoRadioElmt OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75hpnicfDot11HPN-ICF-DOT11-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.75.8hpnicfDot11RRMHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1hpnicfDot11RRMConfigGroupHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2hpnicfDot11RRMRadioCfgTableHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1hpnicfDot11RRMRadioCfgEntryHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.7hpnicfDot11RRMPwrProntoRadioElmtHPN-ICF-DOT11-RRM-MIB