All MIBs › HPN-ICF-DOT11-RRM-MIB › hpnicfDot11RRMChlProntoRadioElmt
hpnicfDot11RRMChlProntoRadioElmt
Module: HPN-ICF-DOT11-RRM-MIB
OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlProntoRadioElmt
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
What is hpnicfDot11RRMChlProntoRadioElmt?
Identifies which AP and radio should perform an immediate channel change at the next calibration cycle, encoded with the AP index in the upper 24 bits and the radio index in the low 8 bits; writing 4294967295 targets every radio on every AP. It only works when channel-selection mode is set to userTriggered, and reading it always returns 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.4 snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlProntoRadioElmt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.4.1 snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlProntoRadioElmt.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfDot11RRMChlProntoRadioElmt.1
Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlProntoRadioElmt OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75 | hpnicfDot11 | HPN-ICF-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8 | hpnicfDot11RRM | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1 | hpnicfDot11RRMConfigGroup | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2 | hpnicfDot11RRMRadioCfgTable | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1 | hpnicfDot11RRMRadioCfgEntry | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.4 | hpnicfDot11RRMChlProntoRadioElmt | HPN-ICF-DOT11-RRM-MIB |