All MIBs › HPN-ICF-DOT11-RRM-MIB › hpnicfDot11RRMCfgChlMode
hpnicfDot11RRMCfgChlMode
Module: HPN-ICF-DOT11-RRM-MIB
OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgChlMode
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Configure the mode of channel selection. This node can be configured only when dynamic channel selection is enabled.
What is hpnicfDot11RRMCfgChlMode?
Chooses how a dynamic channel change is triggered: selfDecisive lets RRM change channels automatically based on RF conditions, while userTriggered (the default) only changes the channel when an admin explicitly initiates one. This setting only takes effect once dynamic channel selection has been enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.3 snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgChlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.3.1 snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgChlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.3.1 i <value>
Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgChlMode OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75 | hpnicfDot11 | HPN-ICF-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8 | hpnicfDot11RRM | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1 | hpnicfDot11RRMConfigGroup | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2 | hpnicfDot11RRMRadioCfgTable | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1 | hpnicfDot11RRMRadioCfgEntry | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.3 | hpnicfDot11RRMCfgChlMode | HPN-ICF-DOT11-RRM-MIB |