HPN-ICF-DOT11-RRM-MIB :: hpnicfDot11RRMAdjChlIntfTrapThhd

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-DOT11-RRM-MIBhpnicfDot11RRMAdjChlIntfTrapThhd

hpnicfDot11RRMAdjChlIntfTrapThhd

Module: HPN-ICF-DOT11-RRM-MIB

OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAdjChlIntfTrapThhd

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.5

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Represents threshold of adjacent interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.

What is hpnicfDot11RRMAdjChlIntfTrapThhd?

Sets, in dBm, the adjacent-channel interference signal-strength threshold for a given AP; a trap is sent once a detected device on a neighboring channel exceeds this signal level. It complements the co-channel threshold by covering interference bleeding in from adjacent rather than the same channel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.5
snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAdjChlIntfTrapThhd

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.5.1
snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAdjChlIntfTrapThhd.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.5.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfDot11RRMAdjChlIntfTrapThhd.1

Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAdjChlIntfTrapThhd OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75hpnicfDot11HPN-ICF-DOT11-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.75.8hpnicfDot11RRMHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1hpnicfDot11RRMConfigGroupHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5hpnicfDot11RRMAPCfg2TableHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1hpnicfDot11RRMAPCfg2EntryHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.5hpnicfDot11RRMAdjChlIntfTrapThhdHPN-ICF-DOT11-RRM-MIB