HPN-ICF-DOT11-RRM-MIB :: hpnicfDot11RRM11nMadtMaxMcs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-DOT11-RRM-MIBhpnicfDot11RRM11nMadtMaxMcs

hpnicfDot11RRM11nMadtMaxMcs

Module: HPN-ICF-DOT11-RRM-MIB

OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11nMadtMaxMcs

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.

What is hpnicfDot11RRM11nMadtMaxMcs?

Sets the maximum Modulation and Coding Scheme (MCS) index that 802.11n clients are required to support on this radio; the value 255 means no cap is enforced, which is the factory default. An admin lowers this from 255 to force older or weaker 802.11n clients off high-order MCS rates they may not reliably sustain, and any value set here must not exceed the max MCS configured for 802.11n supported rates.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.1
snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11nMadtMaxMcs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.1.1
snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11nMadtMaxMcs.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.1.1 i <value>

Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11nMadtMaxMcs OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75hpnicfDot11HPN-ICF-DOT11-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.75.8hpnicfDot11RRMHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1hpnicfDot11RRMConfigGroupHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1hpnicfDot11RRMGlobalCfgParaHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.1hpnicfDot11RRM11nMadtMaxMcsHPN-ICF-DOT11-RRM-MIB