HPN-ICF-DOT11-RRM-MIB :: hpnicfDot11RRM11acMultiCastNss

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHPN-ICF-DOT11-RRM-MIBhpnicfDot11RRM11acMultiCastNss

hpnicfDot11RRM11acMultiCastNss

Module: HPN-ICF-DOT11-RRM-MIB

OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11acMultiCastNss

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.14

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Specify the NSS index for 802.11ac multicast rates. The value 0 indicates that no NSS index is specified. No NSS index is specified for 802.11ac multicast rates by default. The specified NSS index for 802.11ac multicast rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates. Before configuring the NSS index for 802.11ac multicast rates, the maximum NSS index for 802.11ac mandatory rates must be configured. Besides, it must be configured together with the node below.

What is hpnicfDot11RRM11acMultiCastNss?

Sets the number of spatial streams (NSS) used for 802.11ac multicast traffic; 0, the default, means none is specified. It must be configured together with the multicast VHT MCS index and requires the mandatory-rate NSS cap to already be set, ensuring multicast frames use a spatial-stream count clients can decode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.14
snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11acMultiCastNss

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.14.1
snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11acMultiCastNss.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.14.1 i <value>

Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11acMultiCastNss OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75hpnicfDot11HPN-ICF-DOT11-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.75.8hpnicfDot11RRMHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1hpnicfDot11RRMConfigGroupHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1hpnicfDot11RRMGlobalCfgParaHPN-ICF-DOT11-RRM-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.14hpnicfDot11RRM11acMultiCastNssHPN-ICF-DOT11-RRM-MIB