All MIBs › HPN-ICF-DOT11-RRM-MIB › hpnicfDot11RRM11aPwrConstrt
hpnicfDot11RRM11aPwrConstrt
Module: HPN-ICF-DOT11-RRM-MIB
OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11aPwrConstrt
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER is defined by the regulatory domain).
What is hpnicfDot11RRM11aPwrConstrt?
Sets, in dBm, how much transmit power an 802.11a radio must back off from its regulatory maximum; this value is broadcast in beacons only when spectrum management is enabled. Raising it from the default of 0 is used to reduce coverage overlap or meet local RF regulations, since the allowed range runs from 0 up to one less than the regulatory-domain maximum power.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.4 snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11aPwrConstrt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.4.1 snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11aPwrConstrt.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.4.1 i <value>
Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11aPwrConstrt OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75 | hpnicfDot11 | HPN-ICF-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8 | hpnicfDot11RRM | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1 | hpnicfDot11RRMConfigGroup | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1 | hpnicfDot11RRMGlobalCfgPara | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.4 | hpnicfDot11RRM11aPwrConstrt | HPN-ICF-DOT11-RRM-MIB |