All MIBs › HPN-ICF-DOT11-RRM-MIB › hpnicfDot11APInterfNumThreshhd
hpnicfDot11APInterfNumThreshhd
Module: HPN-ICF-DOT11-RRM-MIB
OID (symbolic): HPN-ICF-DOT11-RRM-MIB::hpnicfDot11APInterfNumThreshhd
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Represents threshold of AP interference . If the value of AP interference exceeds this threshold, AP interference trap will be sent. If the value of this node is zero, AP interference trap will be sent immediately.
What is hpnicfDot11APInterfNumThreshhd?
Sets the interfering-AP count threshold that triggers an SNMP trap once exceeded; leaving it at the default of 0 means a trap fires as soon as any interfering AP is detected. Admins raise this to reduce trap noise in dense deployments where some neighboring-AP interference is expected and tolerable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.9 snmpwalk -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11APInterfNumThreshhd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.9.1 snmpget -v2c -c public <target> HPN-ICF-DOT11-RRM-MIB::hpnicfDot11APInterfNumThreshhd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.9.1 i <value>
Start monitoring HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-RRM-MIB::hpnicfDot11APInterfNumThreshhd OID value, configure state conditions and alerts, and monitor any HPE/H3C Comware WLAN Access Controller / Fit AP (Radio Resource Management) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75 | hpnicfDot11 | HPN-ICF-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8 | hpnicfDot11RRM | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1 | hpnicfDot11RRMConfigGroup | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1 | hpnicfDot11RRMGlobalCfgPara | HPN-ICF-DOT11-RRM-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.9 | hpnicfDot11APInterfNumThreshhd | HPN-ICF-DOT11-RRM-MIB |