HPN-ICF-DOT11-QOS-MIB :: hpnicfDot11WmmResetRadioByAP

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HPN-ICF-DOT11-QOS-MIB › hpnicfDot11WmmResetRadioByAP

hpnicfDot11WmmResetRadioByAP

Module: HPN-ICF-DOT11-QOS-MIB

OID (symbolic): HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WmmResetRadioByAP

OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Clear the WMM statistics information of the radio of the specified AP or all radios. The meaning of this object is the same as hpnicfDot11APElementIndex, it represents the index of AP element. If the value of this object is set to 0xFFFFFFFF, WMM statistics information of all radios will be cleared. The value of this object is always 0 with the get operation.

What is hpnicfDot11WmmResetRadioByAP?

A write-triggered action that clears WMM statistics for a specified AP's radio (identified the same way as hpnicfDot11APElementIndex), or for every radio if set to 0xFFFFFFFF; reads of this object always return 0. An admin writes to this OID to reset WMM counters after a configuration change, so subsequent statistics reflect only the new settings.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4.1
snmpwalk -v2c -c public <target> HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WmmResetRadioByAP

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4.1.1
snmpget -v2c -c public <target> HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WmmResetRadioByAP.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4.1.1 i <value>

Start monitoring HP Networking (H3C ICF-based) wireless access point/controller (WMM/EDCA QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WmmResetRadioByAP OID value, configure state conditions and alerts, and monitor any HP Networking (H3C ICF-based) wireless access point/controller (WMM/EDCA QoS) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.15hpnicfHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2hpnicfCommonHPN-ICF-OID-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75hpnicfDot11HPN-ICF-DOT11-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.15.2.75.9hpnicfDot11QoSHPN-ICF-DOT11-QOS-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.9.1hpnicfDot11WmmCfgGroupHPN-ICF-DOT11-QOS-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4hpnicfDot11WmmResetGroupHPN-ICF-DOT11-QOS-MIB
1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4.1hpnicfDot11WmmResetRadioByAPHPN-ICF-DOT11-QOS-MIB