All MIBs › HPN-ICF-DLDP-MIB › hpnicfDLDPSystemEnable
hpnicfDLDPSystemEnable
Module: HPN-ICF-DLDP-MIB
OID (symbolic): HPN-ICF-DLDP-MIB::hpnicfDLDPSystemEnable
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: DLDP enable or disable systematically. This node only supports set operation. If setting it to true, all the fiber ports will enable DLDP and the agent automatically creates new rows for each port in hpnicfDLDPPortDLDPTable. If setting it to false, all the fiber ports will disable DLDP and the agent automatically destroy the corresponding rows in hpnicfDLDPPortDLDPTable.
What is hpnicfDLDPSystemEnable?
Globally enables or disables DLDP across all fiber ports on the device; this object only supports SET operations, not meaningful reads. Setting it to true automatically enables DLDP and creates a row in hpnicfDLDPPortDLDPTable for every fiber port, while setting it to false disables DLDP and removes those rows. An admin rolling out unidirectional-link protection across a switch would set this to true once, rather than enabling DLDP port by port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.2 snmpwalk -v2c -c public <target> HPN-ICF-DLDP-MIB::hpnicfDLDPSystemEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.2.1 snmpget -v2c -c public <target> HPN-ICF-DLDP-MIB::hpnicfDLDPSystemEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.2.1 s <value>
Start monitoring HP/H3C Comware switch or router (Device Link Detection Protocol) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DLDP-MIB::hpnicfDLDPSystemEnable OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch or router (Device Link Detection Protocol) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.43 | hpnicfDldp | HPN-ICF-DLDP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.43.1 | hpnicfDLDPMibObject | HPN-ICF-DLDP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1 | hpnicfDLDPConfigGroup | HPN-ICF-DLDP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.2 | hpnicfDLDPSystemEnable | HPN-ICF-DLDP-MIB |